Loading... Please wait...The Audio-Technica ATW-1813D provides a professional, wireless portable solution, while addressing the issues of portability, function and cost. This system combines a plug-in and bodypack transmitter for added convenience and flexibility. The system includes the ATW-R1810 receiver, ATW-T1802 plug-in transmitter, ATW-T1802 bodypack and omnidirectional lavalier microphone. Other configurations are also available.
The ATW-R1810 receiver features a True Diversity UHF receiver. The compact ATW-R1810 is powered with 6 AA batteries. The ATW-T1802 plug-in transmitter features a locking XLR connector for adapting dynamic and condenser microphones. 9-Volt phantom power is provided for condenser microphones. Selectable Hi/Lo RF output power enhances range when needed and a 2 color power/mute LED indicates transmitter status. The transmitter is powered with 2 AA batteries for up to 9 hours.
The ATW-T1801 bodypack transmitter is compact and rugged with a 4-pin HRS connector. The input is switchable between mic and line signal. Selectable Hi/Lo RF output power enhances range when needed and a 2 color power/mute LED indicates transmitter status. The transmitter is powered with 2 AA batteries for up to 9 hours.
Additional features of the 1800 series include 996 Auto-Scanning frequencies, simultaneous operation of up to 10 systems, back-lit LCD, soft-touch buttons and metal components.
| Type of System: | UHF Camera Mount, Frequency Agile |
| RF Carrier Frequency Range: | UHF Band D: 655.500 to 680.375 MHz |
| Approx. Working Range: | 100m (300') typical |
| Overall Frequency Response: | 70Hz to 15kHz |
| Signal-to-Noise Ratio: | 104dB at 30kHz deviation (A-weighted), maximum modulation 37kHz |
| # Of Channels: | 996 total per band (25kHz increments) |
| Type of Receiver: | Dual independent RF sections, automatic-switching diversity |
| Type of Outputs: | 3-pin mini XLR (TA3M-type) |
| Headphone Monitoring: | 3.5 mm TRS, signals on both Tip and Ring |
| Power Requirements: | 12V DC nominal, 500 mA |
| Battery Type/Approx. Life: | ATW-R1820: Six 1.5V AA alkaline (not included) - 6 hours (typ.) ATW-R1810: Four 1.5V AA alkaline (not included) - 10 hours (typ.) |
| Display: | frequency selection is achieved via rotary dials located on the side of the unit |
| Antenna Type: | 1/4 wave vertical (fixed) |
| Dimensions (HxWxD): | 4.92 x 2.95 x 1.25" (125 x 75 x 32mm) |
| Weight: | 10.5 oz (300 g) (with battery) |
| Type of Transmitter: | ATW-T1801 Bodypack |
| Type of Input Connector: | High impedance, low impedance, bias |
| Type of Microphone: | Lavalier |
| Polar Pattern: | Omnidirectional |
| Interchangeable Mic Heads: | Accepts A-T microphones with compatible input connection |
| Battery Type/Approx. Life: | Two 1.5V AA alkaline (not included) Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern |
| Antenna Type: | Flexible |
| Display: | Back-lit LCD |
| Dimensions (WxHxD): | 2.6 x 3.43 x 0.94" (66 x 87 x 24mm) |
| Weight: | 2.8 oz. (80 g) (without battery) |
| Type of Transmitter: | ATW-T1802 Plug-In Transmitter |
| Type of Input Connector: | XLR |
| Type of Microphone: | Plug-In Transmitter Accepts both, dynamic and condenser microphones with 3-pin XLR connections |
| Interchangeable Mic Heads: | Accepts all microphones and line-level sources wired with TA5F connection. |
| Battery Type/Approx. Life: | Two 1.5V AA alkaline (not included) |
| Antenna Type: | Internal |
| Display: | Back-lit LCD |
| Dimensions (WxHxD): | 1.57 x 4.37 x 1.57" (40 x 111 x 40mm) |
| Weight: | 199 grams (7.0 oz) (without batteries) |